Cheap, Clean Drinking Water Purified Through Nanotechnology

April 22, 2010 2 comments »

Source: Inderscience Publishers (2008, February 26). Cheap, Clean Drinking Water Purified Through Nanotechnology. ScienceDaily. Retrieved April 22, 2010, from http://www.sciencedaily.com­ /releases/2008/02/080220094656.htm

ScienceDaily (Feb. 26, 2008) — Tiny particles of pure silica coated with an active material could be used to remove toxic chemicals, bacteria, viruses, and other hazardous materials from water much more effectively and at lower cost than conventional water purification methods, according to researchers writing in the current issue of the International Journal of Nanotechnology.

Peter Majewski and Chiu Ping Chan of the Ian Wark Research Institute, at the University of South Australia, explain that the availability of drinking quality water is fast becoming a major socio-economic issue across the globe, especially in the developing world.

However, water purification technology is often complicated, requires sophisticated equipment and is expensive to run and maintain. Moreover, it usually requires a final costly disinfection stage. The Australian team suggests that nanotechnology could provide a simple answer to the problem.

The researchers have investigated how silica particles can be coated easily with a nanometer-thin layer of active material based on a hydrocarbon with a silicon-containing anchor. The coating is formed through a chemical self-assembly process so involves nothing more than stirring the ingredients to make the active particles.

These active particles, so called Surface Engineered Silica (SES), were then tested to demonstrate that they could remove biological molecules, pathogens such as viruses like the Polio virus, bacteria like Escherichia coli, and Cryptosporidium parvum, which is a waterborne parasite.

“The results clearly show that organic species can efficiently be removed at pH ranges of drinking water by stirring the coated particles in the contaminated water for up to one hour and filtering the powder,” the researchers say. They point out that the filtration process occurs through an electrostatic attraction between the pathogens and the surface engineered particles.

The recent report entitled ‘Water for People – Water for Life’ of the World Water Assessment Program of the UNESCO says that more than 6000 people die every day due to water-related diseases, including diarrhea, worm infections, and infectious diseases. In addition, organic pollutants from industrial waste water from pulp and paper mills, textiles and leather factories, steel foundries, and petrochemicals refineries, are a major cause of illness in parts of the world where regulations do not necessarily protect people from such industrial outflows.

The team’s nanotech approach to water purification could help prevent disease and poisoning for potentially millions of people.

Usulan UGB-TA Mahasiswa TL UNDIP

March 20, 2010 4 comments »

Hari ini banyak sekali mahasiswa TL UNDIP yang diskusi mengenai materi TA. Sesuai prosedur pengajuan ke dosen, maka mahasiswa diharapkan untuk menjelaskan konsep TA-nya hingga apakah TA tersebut layak diseminarkan. Latihan untuk mahasiswa agar dapat menghargai ilmu dan kemandirian, maka usahakan untuk dapat menjelaskan TA secara terstruktur dan sistematis dengan metodologi yang benar. Jika mengacu pada suatu referensi, maka buatlah DAFTAR PUSTAKA sebagai upaya menghindari plagiat.

Untuk UGB, maka ikuti prosedur sekarang dimana UGB terdiri dari dari 2 bab, yaitu Pendahuluan dan Metodologi. Sebenarnya ini kurang karena permasalahan timbul dari referensi-referensi yang diacu, maka solusinya harus ada tinjauan pustaka.

Judul-judul penelitian yang masuk, yaitu:

  1. Pengolahan Limbah Uranium Korosif Dengan Ammonium Zeolit dan Polimer Poliester Tak Jenuh
  2. Uji Toksisitas Effluent OWS KM. BINAIYA Terhadap Artemia salina di Pelabuhan Tanjung Emas Semarang
  3. ……Biooksidasi…..
  4. Pengolahan Air Asam Tambang Menggunakan Biokoagulan: Studi Penurunan TSS, Fe (II), dan Mn (II) Menggunakan Biji Kelor (Moringga oleifera)
  5. 3 Judul menyusul dikirim via email maksimal hari minggu. Wah sebenarnya kerja dosen bisa kapanpun dan dimanapun. Semoga selalu ikhlas dan bermanfaat.

Siklus Karbon dan Dampak Terputusnya Siklus

4 comments »

Video Siklus Karbon dan Dampak Terputusnya Siklus

url: http://www.youtube.com/watch?v=c40jebr9jbg

Keterangan:

Sumber: http://www.kaskus.us/showthread.php?t=3644691

  1. Karbon (C) adalah elemen yang paling sering kita temui di dalam kehidupan kita sehari-hari. Dalam tanaman dan hewan.
  2. Tumbuhan menyimpan Carbon d dalam sari buahnya (dalam bentuk glukose) dan tanaman juga memanfaatkan carbon (CO2-Carbondioksida) dari atmosfer untuk membantu proses fotosintesisnya.
  3. Ketika tumbuhan mati, mereka membusuk dan bakteri pengurai akan menguraikannya menjadi bagian dari tanah, yaitu kompos.
  4. Karbon yang di dalam tanah (kompos) dalam jangka waktu berjuta-juta tahun kemudian, akan berubah menjadi fosil, sebagai sumber minyak bumi.
  5. Sedangkan karbon yg berada di dalam air akan dimanfaatkan tumbuhan air dalam proses fotosintesisnya.
    Ketika ada ikan yg memakan tumbuhan ini, maka terjadi perpindahan karbon (zat makanan/glukose) dari tumbuhan ke ikan. Sedangkan dalam proses pernafasannya, ikan akan mengeluarkan carbon, dalam bentuk CO2 (karbondioksida)
  6. Kelanjutan dari fosil yg telah berubah menjadi sumber minyak bumi,carbon yg terkandung akan di suling (diolah) menjadi berbagai macam jenis minyak bumi, sebagai sumber energi utama di dunia ini.
  7. Metode inilah yg menjadi metode utama penghasil sumber energi kita, untuk menggerakkan mobil,motor, untuk penggerak listrik dan sumber energi bagi perindustrian.
  8. Dampak dari pembakaran minyak bumi, CO2 akan dilepaskan ke udara. Pelepasan CO2 yg berlebih diakibatkan salah satunya oleh deforestation (penghancuran hutan).
  9. Dengan tidak adanya hutan, maka CO2 tidak dapat digunakan sebagai bahan fotosintesis,,akan tetapi akan menumpuk di atmosfer kita.
  10. Penumpukan CO2 akan mengakibatkan efek rumah kaca dimana sinar UV tidak dapat dipantulkan oleh bumi.
  11. Sinar UV yg terperangkan di atmosfer akan menaikkan suhu bumi dan berakibat kepada Pemanasan Global.

Semoga Bermanfaat untuk Kita Semua.

Tugas Akhir

March 18, 2010 2 comments »

Tugas Akhir adalah tugas yang dibuat oleh seorang Mahasiswa pada akhir masa studi sebagai syarat memenuhi kualifikasi sebagai Sarjana.

Tugas Akhir dibuat berdasarkan pemahaman konsep hingga ke penerapannya yang memunculkan suatu analisis hubungan antar variabel. Pemahaman konsep ini harus dimulai dari latar belakang permasalahan (masalah apa yang timbul dan krusial, sehingga membutuhkan penanganan atau penyeleseian masalah). Pemahaman konsep ini berlaku baik untuk TA Perencanaan maupun TA Penelitian.

Tugas Akhir meliputi:

1. TA Perencanaan (Perencanaan Baru, Pengembangan, dan Optimalisasi). Optimalisasi sebaiknya mengandung unsur penelitian yang menghubungkan beberapa variabel untuk analisis.

Contoh TA Perencanaan:

  • Perencanaan IPAL x di Kota x
  • Perencanaan IPAM x di Kota x
  • Perencanaan TPA x di Kota x
  • Perencanaan Pengembangan IPAL/IPAM/TPA x di Kota x
  • Optimalisasi Sistem Transmisi dan Distribusi di Kota x
  • Optimalisasi Sistem Produksi dan Distribusi di Kota x
  • Optimalisasi IPA/IPAL/TPA x di Kota x
  • dll

2. TA Penelitian memiliki konsep analisis yang menghubungkan 2 variabel atau lebih. TA Penelitian juga dapat dilakukan dengan pembuatan suatu pilot plant atau prototype reaktor untuk keperluan optimalisasi dan pengembangan.

Contoh TA Penelitian:

  • Uji Toksisitas Limbah x Menggunakan Daphnia sp dan Artemia Salina
  • Pengaruh Luas Bukaan dan Volume Ruang Dapur Terhadap Konsentrasi CO dan PM
  • Studi Adsorpsi Limbah Tekstil Menggunakan Karbon Aktif dan Lumpur Aktif
  • dll

Semoga penjelasan singkat diatas membantu Mahasiswa dalam pembuatan Tugas Akhir.

USULAN GARIS BESAR – TUGAS AKHIR

3 comments »

Usulan Garis Besar atau UGB adalah gagasan atau ide tertulis yang dibuat sebagai acuan atau pedoman dalam pelaksanaan Tugas Akhir sebelum melangkah pada pembuatan proposal Tugas Akhir.

UGB dibuat secara sederhana yang meliputi 2 (dua) bab, yaitu:

  1. Pendahuluan
  2. Metodologi

Usulan yang dapat penulis sampaikan adalah:

  1. Sebaiknya format UGB harus memiliki tinjauan pustaka sama seperti penulisan proposal TA. Tinjauan pustaka ini merupakan point mendasar di dalam penulisan suatu Karya Ilmiah.
  2. Tambahan lainnya adalah Daftar Pustaka. Ini penting untuk menghindari plagiat karya ilmiah.
  3. UGB merupakan konsep pemahaman Tugas Akhir yang akan dilakukan oleh Mahasiswa, sehingga seorang Mahasiswa harus mampu menjelaskan dengan baik kepada Pembimbing Tugas Akhir atau Dosen, termasuk di dalamnya adalah mempertahankan gagasan Tugas Akhirnya agar dapat diterima dan diusulkan untuk melangkah ke pembuatan Proposal secara mendetail. Konsep yang harus jelas tersebut meliputi Latar Belakang, Maksud dan Tujuan, Ruang Lingkup dan Metodologi. Adapun formatnya mengikuti aturan di Prodi yang berlaku.
  4. Usulan akhir adalah mungkin UGB dihilangkan tetapi langsung pada pembuatan Proposal TA yang mendetail dan lengkap. Ini dilakukan untuk menghemat waktu terutama di dalam pematangan konsep TA.

Usulan ini penulis sampaikan karena banyaknya kesulitan bagi Mahasiswa di dalam membuat suatu gagasan yang terstruktur, sistematis dan tepat sasaran.

Apakah Detergen Memberikan Efek pada Pertumbuhan Tanaman?

March 14, 2010 4 comments »

Sumber: http://www.miniscience.com/projects/plantdetergent/index.html

Problem:

Do detergents affect plant growth?

Research:

Plants grow by using water and the sun to make food. We are trying to find out if different types of detergents will affect the growth on a plant. This experiment, if done properly, will give us the answers we’re looking for.

Hypothesis:

We think that the detergents will affect the plant growth and kill the plant since the detergents material is poisonous to most living things.

Material:

1. 4 of the same plants in little pots
2. 3 Different types of detergent.
3. Area with sufficient sunshine

Procedure:

First of all, make sure that the plants are all the same and are all fresh and not withered. Take the first plant and put it in the area where you are doing your experiment. Water it and let it stay. Next, take the 3 detergents and mix half a cup of detergent with half a cup of water and pour the mixtures in each of the remaining 3 plants. Do this for the next 7 days and record your results below after the 7th day.

Record And Analyze Data:

After testing for 7 days, the experiment showed that the three plants that had detergent material in them died. The poison killed the plants just like we thought in our hypothesis. The plant that didn’t have detergent in it lived and was in good condition.

Bagi peneliti pemula ikuti tata cara penulisan ide dan metodologi penelitian diatas. Sederhana dan mudah dimengerti. Selamat Meneliti.

Pedoman Tugas Besar Sistem Penyediaan Air Minum

March 7, 2010 6 comments »

Langkah-langkah pengerjaan laporan Tugas Besar SPAM:

1. Data-data yang mendukung pembuatan laporan seperti peta wilayah perencanaan, peta kontur/topografi, peta tata guna lahan, dan demografi/kependudukan.
2. Membuat pendahuluan: latar belakang, tujuan & manfaat, ruang lingkup.
3. Membuat tinjauan pustaka yang berhubungan dengan perencanaan SPAM dan komponen-komponennya.
4. Membuat gambaran umum wilayah perencanaan.
5. Membuat skema kerja atau pola pikir perencanaan.
6. Analisis dan Perencanaan:
* Proyeksi penduduk
* Proyeksi fasilitas
* Pembagian blok pelayanan
* Kebutuhan air bersih
* Dimensi
* Sistem air baku (sungai, mata air, sumur, dll)
* Sistem produksi (IPA (sketsa))
* Jaringan transmisi (bak pelepas tekanan (BPT), dll)
* Reservoir (Tabel dan Grafik)
* Jaringan distribusi (program komputer EPANET versi 2.0)
7. BOQ (Bill of Quantity)
8. RAB (Rencana Anggaran Biaya)
9. Gambar-gambar:

===========================================================================
Gambar Tipikal:
* Penanaman pipa, diameter, dan jalur yang dilalui
* Sambungan rumah
* Kran atau hidran umum dan hidran kebakaran
* Jembatan pipa
* Wash out
* Air valve (single atau double)
* Check valve
* Thrust Block
* Sambungan pipa/pipe fitting (tee, elbow/bend, giboult joint, dll)
* Meter induk
* Pembesian (single atau double)
* Manhole (pada reservoir, broncaptering, bak pelepas tekan, dll)
* Pompa dan rumah pompa
===========================================================================
Gambar Khusus:
* Skema perencanaan SPAM
* Intake (broncaptering, river intake, spring intake, dll)
* Bak pelepas tekan (jika ada)
* Ground reservoir dengan volume sesuai hitungan
* Menara air/Elevated Reservoir bila diperlukan
* Pengukuran jalur pipa (satu lembar saja)
* EGL (energy grade line) dan HGL (hydraulic grade line)
* Detail junction
===========================================================================
Wilayah Perencanaan: (Optional)

1. Kabupaten Banjarnegara : Banjarnegara
2. Kabupaten Banyumas : Purwokerto
3. Kabupaten Batang : Batang
4. Kabupaten Blora : Blora
5. Kabupaten Boyolali : Boyolali
6. Kabupaten Brebes : Brebes
7. Kabupaten Cilacap : Cilacap
8. Kabupaten Demak : Demak
9. Kabupaten Grobogan : Purwodadi
10. Kabupaten Jepara : Jepara
11. Kabupaten Karanganyar : Karanganyar
12. Kabupaten Kebumen : Kebumen
13. Kabupaten Kendal : Kendal
14. Kabupaten Klaten : Klaten
15. Kabupaten Kudus : Kudus
16. Kabupaten Magelang :Mungkid
17. Kabupaten Pati : Pati
18. Kabupaten Pekalongan : Kajen
19. Kabupaten Pemalang : Pemalang
20. Kabupaten Purbalingga : Purbalingga
21. Kabupaten Purworejo : Purworejo
22. Kabupaten Rembang : Rembang
23. Kabupaten Semarang : Ungaran
24. Kabupaten Sragen : Sragen
25. Kabupaten Sukoharjo : Sukoharjo
26. Kabupaten Tegal : Slawi
27. Kabupaten Temanggung : Temanggung
28. Kabupaten Wonogiri : Wonogoro
29. Kabupaten Wonosobo : Wonosobo
30. Kota Magelang
31. Kota Pekalongan
32. Kota Salatiga
33. Kota Semarang
34. Kota Surakarta
35. Kota Tegal

============================================================================

Minimal Asistensi 8 kali yang dibuktikan dengan lembar asistensi.

Stages of An-aerobic Digestion

February 17, 2010 1 comment »

There are four key biological and chemical stages of anaerobic digestion:[40][41]

  1. Hydrolysis
  2. Acidogenesis
  3. Acetogenesis
  4. Methanogenesis

In most cases biomass is made up of large organic polymers. In order for the bacteria in anaerobic digesters to access the energy potential of the material, these chains must first be broken down into their smaller constituent parts. These constituent parts or monomers such as sugars are readily available by other bacteria. The process of breaking these chains and dissolving the smaller molecules into solution is called hydrolysis. Therefore hydrolysis of these high molecular weight polymeric components is the necessary first step in anaerobic digestion.[42] Through hydrolysis the complex organic molecules are broken down into simple sugars, amino acids, and fatty acids.

Acetate and hydrogen produced in the first stages can be used directly by methanogens. Other molecules such as volatile fatty acids (VFA’s) with a chain length that is greater than acetate must first be catabolised into compounds that can be directly utilised by methanogens.[43]

The biological process of acidogenesis is where there is further breakdown of the remaining components by acidogenic (fermentative) bacteria. Here VFAs are created along with ammonia, carbon dioxide and hydrogen sulfide as well as other by-products.[44] The process of acidogenesis is similar to the way that milk sours.

The third stage anaerobic digestion is acetogenesis. Here simple molecules created through the acidogenesis phase are further digested by acetogens to produce largely acetic acid as well as carbon dioxide and hydrogen.[45]

The terminal stage of anaerobic digestion is the biological process of methanogenesis. Here methanogens utilise the intermediate products of the preceding stages and convert them into methane, carbon dioxide and water. It is these components that makes up the majority of the biogas emitted from the system. Methanogenesis is sensitive to both high and low pHs and occurs between pH 6.5 and pH 8.[46] The remaining, non-digestable material which the microbes cannot feed upon, along with any dead bacterial remains constitutes the digestate.

A simplified generic chemical equation for the overall processes outlined above is as follows:

C6H12O6 → 3CO2 + 3CH4

References:

  1. Anaerobic digestion, www.waste.nl, retrieved 19.08.07 Ciborowski, P (2004)Anaerobic Digestion in the Dairy Industry, Minnesota Pollution Control Agency Air Innovations Conference, www.epa.gov, retrieved 19.08.07
  2. Sleat, R. & Mah, R. (2006) Hydrolytic Bacteria in Anaerobic digestion of biomass, p15 Boone, D. & Mah, R. (2006) Transitional bacteria in anaerobic digestion of biomass, p35
  3. What is anaerobic digestion, www-sop.inria.fr, retrieved 24.10.07
  4. Anaerobic digestion, www.biotank.co.uk, retrieved 24.10.07
  5. Martin, A.D. (2007) Understanding Anaerobic Digestion, Presentation to the Environmental Services Association, 16.10.07, www.esauk.org, retrieved 22.10.07

An-aerobic Digestion

1 comment »

Anaerobic digestion is a series of processes in which microorganisms break down biodegradable material in the absence of oxygen. It is widely used to treat wastewater sludges and organic waste because it provides volume and mass reduction of the input material.[1] As part of an integrated waste management system, anaerobic digestion reduces the emission of landfill gas into the atmosphere. Anaerobic digestion is a renewable energy source because the process produces a methane and carbon dioxide rich biogas suitable for energy production helping replace fossil fuels. Also, the nutrient-rich solids left after digestion can be used as fertiliser.

The digestion process begins with bacterial hydrolysis of the input materials in order to break down insoluble organic polymers such as carbohydrates and make them available for other bacteria. Acidogenic bacteria then convert the sugars and amino acids into carbon dioxide, hydrogen, ammonia, and organic acids. Acetogenic bacteria then convert these resulting organic acids into acetic acid, along with additional ammonia, hydrogen, and carbon dioxide. Methanogens, finally are able to convert these products to methane and carbon dioxide.[2]

Previously, the technical expertise required to maintain anaerobic digesters coupled with high capital costs and low process efficiencies had limited the level of its industrial application as a waste treatment technology.[3] Anaerobic digestion facilities have, however, been recognised by the United Nations Development Programme as one of the most useful decentralised sources of energy supply, as they are less capital intensive than large power plants.[4]

References:

  1. Anaerobic digestion http://www.monsal.com, retrieved 18.09.07
  2. waste.nl Anaerobic digestion reference sheet, www.waste.nl, retrieved 25.10.07
  3. waste.nl Anaerobic digestion reference sheet, www.waste.nl, retrieved 26.10.07
  4. Biogas Bonanza for Third World Development, www.i-sis.org.uk, retrieved 4.11.07, cites United Nations Development Programme (UNDP) 1997 Report, Energy After Rio: Prospects and Challenges

Pengukuran dan Perhitungan Timbulan Sampah

3 comments »

Pengukuran dan perhitungan contoh timbulan sampah harus mengikuti ketentuan-ketentuan sebagai berikut:

Satuan yang digunakan dalam pengukuran timbulan sampah adalah:

  1. Volume basah (asal): L/unit/hari
  2. Berat basah (asal): Kg/unit/hari

Satuan yang digunakan dalam pengukuran komposisi sampah adalah dalam % berat basah/asal. Jumlah unit masing-masing lokasi pengambilan contoh timbulan sampah, yaitu:

  1. Perumahan: jumlah jiwa dalam keluarga
  2. Toko: jumlah petugas/luas areal
  3. Sekolah: jumlah murid dan guru
  4. Pasar: luas pasar atau jumlah pedagang
  5. Kantor: jumalha pegawai
  6. Jalan: panjang jalan dalam meter
  7. Hotel: jumlah tempat tidur
  8. Restoran: jumlah kursi/luas areal
  9. Fasilitas umum lainnya: luas areal

Metode pengukuran contoh timbulan sampah, yaitu:

  1. Sampah terkumpul diukur volume dengan wadah pengukur 40 Liter dan ditimbang beratnya, dan/atau;
  2. Sampah terkumpul diukur dalam bak pengukur besar 500 Liter dan ditimbang beratnya, kemudian dipisahkan berdasarkan komponen komposisi sampah dan ditimbang beratnya.

Perhitungan besaran timbulan sampah perkotaan berdasarkan

  1. Rata-rata timbulan sampah perumahan
  2. Perbandingan total sampah perumahan dan non perumahan

Pengambilan contoh dapat dilakukan dengan frekuensi sebagai berikut:

  1. Pengambilan contoh dilakukan dalam waktu 8 hari berturut-turut pada lokasi yang sama dan dilaksanakan dalam 2 pertengahan musim tahun pengambilan contoh
  2. Butir 1 dilakukan paling lama 5 tahun sekali

Sumber: SNI 19 – 3964 – 1994

to be continued…